In case you are purchasing a stair with balusters in a contrasting material, including painted balusters on an oak stair, questions will likely arise regarding the finishing of the stair. “Should my painter finish the balusters separately from the stair, then have the balusters set up when the stair is finished?
Here are a few points to consider with Stair Contractor: Your painter will normally choose painting the balusters before installation. This enables them to be sprayed instead of brushed and eliminates plenty of “cut-in” work.
Painting balusters separately does mean that the stair installers will need to revisit the web page, eliminate the railings and install the balusters. There will be charge for this particular “second trip” to the jobsite. You should remember to schedule this “second trip” in coordination using the completing the finish.
Leaving your balusters out for painting means that they are more likely to be lost or stolen during this time period. You will end up in charge of balusters left on the jobsite. After the painted balusters are finally installed, you will see additional “touch-up finishing required in the rail joints. Holes will have to be filled and stain and complete re-applied for the ultimate finish.
Plan installation of your hardwood stair for after your drywall continues to be taped, sanded, and primed. The drywall process can affect the stair. Drywall mud and paint overspray can make the stair finishing process very hard and may even make desired results impossible to accomplish.
Most hardwoods are an open grain wood and once dirt gets embedded in open grain it is very hard to remove, despite having sanding. This may use a negative effect on the appearance and texture of the finish. Care should also be taken to protect the stair from dirt and mud.
Never Cover Hardwood Stairs With Plastic. Plastic will not allow airflow, trapping moisture underneath and causing the wood to grow and contract. This expansion and contraction causes the wood joints to open up up and may result in the wood to break into.
The environmental conditions indoors are essential to the standard of the stair. Hardwood lumber continues to be dried by way of a very controlled process with an industry standard moisture content of 6 – 8%. This matches the moisture content vcbxbf the average home and allows the wood to stay stable under normal conditions.
In cold climates, when a home is heated to some high temperature during winter, air can become very dry, creating the wood to shrink. This shrinkage can make cracks visible inside the wood and joints may begin to start up. Subjecting a stair to high degrees of heat is like putting it within an oven and definately will accelerate the deterioration from the stair.
All hardwoods has to be sealed on every side to retard movement and protect from exposure to elements and damage. It is suggested to seal wood immediately.